基于太赫兹光谱的人参和西洋参鉴别

为了快速区分人参和西洋参，依据两者所含的人参皂苷在太赫兹波段具有不同指纹光谱，提出了一种基于人参皂苷的太赫兹光谱鉴别人参和西洋参的方法。采用MATLAB软件识别人参和西洋参的太赫兹光谱，同时根据太赫兹光谱特征并通过标准的主成分分析(PCA)区分出人参、西洋参。实验结果表明，基于太赫兹光谱的主成分分析可精确区分出人参、西洋参，并且还可以应用于其他类似物质的区分中。     

基于灰色关联度的微孔端面机械密封开启力共性影响参数分析

目前微孔端面机械密封采用的几何参数繁多,缺乏明确物理意义。为找出跨孔型的共性几何参数,基于Fluent多相流空化模型,针对矩形孔、菱形孔、椭圆孔端面机械密封,建立密封间隙流体的三维数值计算模型,计算得到144条开启力数据;在分析开启力和几何尺寸之间的关系、额外开启力产生机制的基础上,提出等效长度和等效宽度2个具有物理意义的几何参数;采用灰色关联度分析法,分析和验证等效长度、等效宽度、方向角、面积比对开启力的影响,发现4个因素对3种微孔密封的间隙流体开启力都有影响,但等效长度与等效宽度的影响较方向角、面积比大。     

天然气新型气液分离器性能试验研究

为了解决天然气含有饱和水汽和少量烃降低输气效率、堵塞管线和设备等问题,利用旋风子、稳流元件、叶栅式分离元件、折流板式分离元件组合成新型天然气分离器。利用相位多普勒粒子分析仪对新型天然气分离器进出口粒子粒径与液态水含量的进行对比测试,以研究新型分离器的分离效率。结果表明:新型分离器具有良好的气液分离作用;在流量为10～64 m~3/h时,分离器的分离效率成抛物线形式,在33 m~3/h时分离器的分离效率降到最低值95.16%,主要原因是流量在33 m~3/h时,试验气液混合不均匀,导致内部流态紊乱,以至于试验测得分离效率相对偏低;在流量为10 m~3/h时分离器分离效率最高,为99.29%;分离器对该进口条件的气体中雾状液粒有较高的分离作用,且可以明显降低分离器出口气体中液粒的平均粒径;从进口到气相出口压力逐渐降低,总压降为950 Pa;流动区域速度梯度大不利于气液相分离,流动掺混会导致分离效率降低。     

Comparative analysis of Cu/blood and Cu–CuO/blood nanofluids on a peristaltic flow governed by an asymmetric channel

Contraction and expansion play a crucial role in biomedical applications, such as heart pumping, ovum in the feminine fallopian vessel, blood fluid transport, and so forth. Inspired by these features, the present effort concentrates on the consequences of a thermal slip in the peristalsis of Cu/blood and Cu–CuO/blood nanofluids in asymmetric flow formation. Hence, the microrotation influence of blood flow is considered here. Heat transported through the channel due to perpendicular flow buoyancy effects is also studied. The special effects of thermal radiation, nanoparticle shape, and heat source/sink parameters on the flow are studied in the proposed model. The MATLAB BVP4c condition is utilized to achieve the numerical solutions of the transformed system of nonlinear coupled differential equations. The most important outcome of the present analysis is an enhancement in the evaluation study of the Cu/blood and Cu–CuO/blood nanofluids on the axial velocity, axial spin velocity, pressure gradient, and temperature distributions in the asymmetric channel. Also, another important outcome is observed that the Cu–CuO blood nanofluid strongly has dominated the Cu/blood nanofluid in axial spin velocity.     

Enhancing the sweetening power of lactose by enzymatic modification in the reformulation of dairy products

Lactose solutions of up to 50% (w/v) were incubated with lactases and glucose isomerases for subsequent implementation in dairy product samples to enhance sweetness. A degree of hydrolysis of >90% and of isomerisation of 50% were attainable. The sensory sweetening power of lactose in solutions of up to 50% (w/v) can be enhanced 2–3 times. Based on sensory experiments, application of this bi‐enzymatic system in yoghurt and pudding samples allowed for a 10–20% (w/w) reduction in the total sugar content, whilst retaining equal sweetness. The growth of yoghurt starter cultures was not affected, yet furosine formation more than doubled in high heated, enzyme‐modified milk.     

Nonmechanical criteria proposed for prediction of hot tearing sensitivity in 2024 aluminum alloy

Two theoretical criteria represented by Katgerman, and Clyne and Davies for prognosticating hot tearing sensitivity were compared. Both unrefined and grain-refined samples of Al2024 alloy were solidified at various cooling rates ranging from 0.4 to 17.5 °C/s. Thermal analysis was used to detect dendrite coherency point and temperature of eutectic reaction. Curves of solid and liquid fractions were plotted based on Newtonian method to determine hot tearing susceptible areas. The experimental results show that the most susceptible zone in which hot tearing can occur in Al2024 is where Al₂CuMg intermetallic compound forms as a eutectic phase at last stage of mushy-state interval. Also, both criteria are in a good agreement with each other at high cooling rates used in direct-chill casting process while Clyne and Davies' model is more acceptable to determine hot tearing tendency from low to medium cooling rates.     

Cutting parameter optimization for one-step shaft excavation technique based on parallel cutting method

The outcome of the cutting blasting in a one-step shaft excavation is heavily related to the cutting parameters used for parallel cutting method. In this study, the relationships between the cutting parameters (such as the hole spacing L and the empty hole diameter D) and damage zones were investigated by numerical simulation. A damage state index γ was introduced and used to characterize the crushing and crack damage zones through a user-defined subroutine. Two indices, i.e., η₁ and η₂ that can reflect the cutting performance, were also introduced. The simulation results indicate that an optimal value of L can be obtained so that the η₁ and η₂ can reach their optimal states for the best cutting performance. A larger D results in better cutting performance when the L value maintains its best. In addition, the influences of the loading rate and the in-situ stress on the cutting performance were investigated. It is found that an explosive with a high loading rate is suit for cutting blasting. The propagation direction and the length of the tensile cracks are affected by the direction and the magnitude of the maximum principal stress.     

风速时间序列混沌判定方法比较研究

混沌识别是对非线性时间序列进行混沌预测的前提。针对时间序列风速确定性与随机性相结合的复杂非线性特征,研究了不同的混沌识别方法,并对风速时间序列进行混沌特征识别。应用随机噪声、周期运动及经典混沌系统的时间序列对所选方法进行可靠性验证。对美国国家风能研究中心M2测风塔实测时间序列风速数据进行非线性混沌特征识别。结果表明:风速时间序列具有明显的混沌特征;各风速时间序列表现出不同程度的混沌特征;各混沌识别方法对风速时间序列混沌特征的表达形式不同,互为补充,相互验证。